Archive 1997–2024

Lepa B-Series 850W - The Leopard Attacks

Voltage Regulation

+3.3V Regulation/Ripple and Noise
Load Voltage
5% +3.33% (6 mV)
10% +3.03% (28 mV)
20% +2.72% (34 mV)
50% +1.81% (25 mV)
80% +1.51% (28 mV)
100% +1.80% (46 mV)
110% +1.21% (48 mV)
Crossload +12V max. +2.72%
Crossload +3.3V/+5V max. -0.91%

 

+5V Regulation/Ripple and Noise
Load Voltage
5% +3.40% (4 mV)
10% +3.00% (5 mV)
20% +2.80% (14 mV)
50% +2.20% (14 mV)
80% +1.80% (18 mV)
100% +1.80% (37 mV)
110% +1.00% (39 mV)
Crossload +12V max. +1.60%
Crossload +3.3V/+5V max. -3.60%

 

+12V Regulation (Worst Rail)/Ripple and Noise (Worst Rail)
Load Voltage
5% +2.75% (15 mV)
10% +2.58% (37 mV)
20% +2.42% (38 mV)
50% +2.08% (28 mV)
80% +1.50% (44 mV)
100% +1.75% (46 mV)
110% +1.50% (47 mV)
Crossload +12V max. -0.92%
Crossload +3.3V/+5V max. +1.83%

Noise Levels

Loudness
Load Opinion
5% low fan noise
10% low fan noise
20% low fan noise
50% low fan noise
80% fan noise
100% strong fan noise
110% strong fan noise

Efficiency and PFC

115VAC. 60Hz
Load Efficiency PFC
5% 72.84% 0.670
10% 79.58% 0.688
20% 83.09% 0.823
50% 86.21% 0.906
80% 84.75% 0.922
100% 82.80% 0.945
110% 81.10% 0.948

Unsurprisingly the power supply has no problems with both crossload tests. The measured values ​​are not as good as the results from power supplies with DC-to-DC, but the results are great for a PSU in this price class. With a small load the voltages are relatively high while power factor is low. At 20% load both the efficiency and the PF are satisfying. At peak load Lepa reaches more than 86% efficiency, which is quite good for 80 Plus Bronze. It seems that the customer gets everything promised in the product description.

The ripple voltage and noise are moderate; even so, the results could be better. During 100% load the +3.3V ripple was close to the upper limit of the ATX specification. The subjective loudness corresponds to what one would expect from a power supply like this. Under light load the fan rotates as slowly as possible. With 80% load the fan is clearly audible, but since most 850W PSUs are used in high-end PCs the graphics cards needed to hit 80% load (680W output) will in all likelihood be making the lion's share of the system noise.

Originally published at https://www.anandtech.com/show/5074/lepa-bseries-850w-the-leopard-attacks (Wayback Machine).