Archive 1997–2024

ASUS F1A75-V Pro vs. Gigabyte GA-A75-UD4H – Llano at ~$120

USB Speed

For this benchmark, we run CrystalDiskMark to determine the ideal sequential read and write speeds for the USB port using our 64GB Patriot SuperSpeed USB 3.0 drive. Then we transfer a set size of files from the SSD to the USB drive, and monitor the time taken to transfer. The files transferred are a 1.52 GB set of 2867 files across 320 folders—95% of these files are small typical website files, and the rest (90% of the size) are the videos used in the Sorenson Squeeze test.

USB 2.0 Sequential Read Speeds

USB 2.0 Sequential Write Speeds

USB 2.0 Copy Time

In the USB 2.0 world, while the Gigabyte board gives a lower sequential value (after repeated tests), it performs better in our copy test.

USB 3.0 Sequential Read Speeds

USB 3.0 Sequential Write Speeds

USB 3.0 Copy Time

The Gigabyte board wins again in our USB 3.0 testing.

SATA Testing

We also use CrystalDiskMark for SATA port testing. This test probes the efficiency of the data delivery system between the chipset and the drive, or in the case of additional SATA ports provided by a third party controller, the efficiency between the controller, the chipset and the drive.

SATA 6 Gbps Sequential Read Speeds (C300)

SATA 6 Gbps Sequential Write Speeds (C300)

We see the Gigabyte board also excel in pure SATA testing.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests, such as audio, will be further down the line. So if the audio device requires data, it will have to wait until the request is processed before the buffer is filled. If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time, resulting in an empty audio buffer—this leads to characteristic audible pauses, pops and clicks. Having a bigger buffer and correctly implemented system drivers obviously helps in this regard. The DPC latency checker measures how much time is processing DPCs from driver invocation—the lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds and taken as the peak latency while cycling through a series of short HD videos - less than 500 microseconds usually gets the green light, but the lower the better.

DPC Latency Maximum

Initially, I had trouble with both boards here. It turns out that when monitoring software is available (EasyTune6, AI Suite), this causes spikes to occur in the DPC Latency. The spikes were considerably worse on the ASUS board (3000+) compared to the Gigabyte board (~400), but the values we're looking at are with these softwares switched off. In this case, both boards fall within acceptable levels, but the Gigabyte board has less than half the latency.

Originally published at https://www.anandtech.com/show/5052/asus-f1a75v-pro-vs-gigabyte-gaa75ud4h-llano-at-120 (Wayback Machine).