Cooler Master's Storm Enforcer: The Not-So-Quiet Storm
Noise and Thermal Testing, Stock
The order of the day for many of the enclosures below the $100 mark is an intake fan at the bottom of the front of the case and an exhaust fan at the back, behind the CPU. Where Cooler Master mixes things up a bit is by using a 200mm intake instead of the usual 120mm, turning the Storm Enforcer into a positive pressure design. That said, the massive ventilation at the top of the case could bode either well or poorly for it, as BitFenix's Shinobi had a screen over this area to help muffle fan noise.





Thermals remain consistently good for the Cooler Master Storm Enforcer. The In-Win BUC still does better, but the BUC has the benefits of being both larger and having a third fan, and it sells for $20 more than the Enforcer. The SSD temps are the worst of the lot, but still within spec; using the included adaptor and moving the SSD into one of the 3.5" bays would probably even that out, as it currently sits at the bottom of the case next to the power supply.

Unfortunately, the Enforcer has to run pretty loud to hit those thermals. While it's not as bad as the Sonata IV (at its medium setting), it's worlds away from the more expensive BUC while the Shinobi seems to offer the best balance of idle and load noise.
Originally published at https://www.anandtech.com/show/4466/cooler-masters-storm-enforcer-the-notsoquiet-storm (Wayback Machine).