Archive 1997–2024

Antec HCG 750W: Built for Gamers?

Voltage Regulation and Quality

+3.3V regulation
Load Voltage
10% +2.42%
20% +2.12%
50% +1.21%
80% +-0%
100% -0.30%
110% -0.80%

 

+5V regulation
Load Voltage
10% +2.60%
20% +2.40%
50% +1.40%
80% +0.60%
100% +-0%
110% -0.40%

 

+12V regulation (worst rail)
Load Voltage
10% +1.50%
20% +1.33%
50% +0.80%
80% +0.16%
100% -0.17%
110% -0.54%

All rails are very close to the optimal value. They start with a small over voltage and end with results just under by 0.5% to 1.0%. Since this PSU has multiple 12V outputs we have selected the worst rail for the tables, as we always do. +12V is not too weak but we should keep in mind that our loads are 14A per rail, according to the ATX standard. This is far away from the rated maximum but more than enough to reach 750 watts output.

Ripple and Noise

+3.3V ripple quality
Load Ripple and noise
10% 15mV
20% 15mV
50% 22mV
80% 27mV
100% 31mV

 

+5V ripple quality
Load Ripple and noise
10% 18mV
20% 19mV
50% 28mV
80% 33mV
100% 36mV

 

+12V ripple quality (worst rail)
Load Ripple and noise
10% 23mV
20% 29mV
50% 30mV
80% 34mV
100% 50mV

The good results continue here. Both smaller rails have less than 40mV ripple and noise (50mV is the ATX spec limit). The +3.3V rail shows small transients and +5V has some negligible overshoots. +12V has higher absolute ripple, but as a percentage it's better than the other rails at only 50mV. While this power supply is no match for the HCP series, the price makes the difference and there's nothing to worry about.

Originally published at https://www.anandtech.com/show/4258/antec-hcg-750-gaming-psu (Wayback Machine).