Archive 1997–2024

Seasonic X-Series 560W

Noise, Efficiency, and Power Factor

Sound Pressure Level
Load dB(A)
10% 0
20% 0
50% 18
80% 23
100% 30
110% 32

There is no noise during low loads since the fan doesn't rotate until the PSU is putting out more than ~112W. If you select appropriate components elsewhere, you can actually use this to create a silent system for low to moderate loads, and you won't have to worry about burning anything out at higher loads. In addition, the RPMs are tolerable up to 50% load. Beyond that point, this PSU is no more silent than competing solutions, but we should keep in mind that most GPUs are louder while gaming so the results are fine. If you want to get uncompromising silence at all loads you can buy the X-460FL, but if silence is the goal you won't want to run higher-end GPUs.

Efficiency and PFC

115VAC, 60Hz
Load Efficiency PFC
10% 82% 0.975
20% 87% 0.990
50% 91% 0.993
80% 91% 0.995
100% 90% 0.996
110% 89% 0.997

This is basically an 850W PSU that doesn't always run the fan. We can see that the efficiency is a bit low at 10% load, but 80 Plus doesn't worry about anything below 20%. The efficiency also drops off slightly at higher loads, but it does meet or exceed the 80 Plus Gold requirements (87/90/87% effeciency at 20/50/100% loads). We are also very happy with the high PFC at all loads, though this is no surprise for the American 115VAC power grid; Europeans and others on 230VAC will have to accept lower PFC but get slightly higher efficiency in return.

Originally published at https://www.anandtech.com/show/4217/seasonic-xseries-560w (Wayback Machine).