Archive 1997–2024

TViX Slim S1 : Bidding Adieu to the Realtek RTD1283

The TViX Slim S1 is undoubtedly one of the best looking media streamers we have seen. The brushed aluminium on top presents a very sophisticated look. There are some screws on the rear side of the unit to keep the SPDIF and the Component / Composite connectors in place. The underside of the unit has 6 screws, 4 of which are beneath the rubber pads.

Removing the 6 screws enables the underside of the unit to be taken out. The SATA HDD connector is screwed to the underside panel, and the full panel can be taken out by removing the connecting cables from the motherboard. The hard disk cage, held to the main board using two screws, was taken out to expose the motherboard.

Note that what we have on view here is the underside of the main board. On this side, we have:

  1. Holtek HT16511 VFD Driver IC
  2. Samsung K9F1G08U0B 1 Gb (128 MB) x8 SLC NAND Flash

The motherboard is soldered to the top panel. So, we weren't able to grab shots of the DRAM (supposedly, 256 MB) and the main chip (RTD 1283DD). However, this soldering enables the RTD1283 to be in close contact with the top aluminium panel. The panel can, thus, act as a big heat sink. This is innovative thermal design, unlike what we have seen in other media players.

Originally published at https://www.anandtech.com/show/4212/tvix-slim-s1-bidding-adieu-to-the-realtek-rtd1283 (Wayback Machine).