Archive 1997–2024

Dell Zino HD 410 HTPC Review

One of the main complaints about the Zino 400 HTPC was the overheating of the system. After putting the Zino 410 under extreme stress (Prime 95 + Furmark simultaneously), I found that the thermal characteristics were much better this time around.

Compared to the first generation unit, Dell made extensive changes to the thermal design

  1. The fan at the back of unit was made bigger (60mm in Zino 410 compared to the 50mm in the Zino 400)
  2. The inlet and outlet designs were optimized to allow improvement in inlet at the front and bottom and outlet at the back and the top
  3. The BIOS fan curve tables were updated
  4. The placement of the memory modules was changed to distribute the hot-spots in the system.
  5. The opening between the motherboard and the chassis side wall was enlarged to allow more airflow
  6. The Zino 410 also has a 2 layer distribution airflow design, with the GPU and one of the memory slots getting cooled in the lower layer.

Credit must be given where it is due, and we really applaud Dell for putting the lessons learnt in the previous generation product to good use. Of all the SFF HTPCs we have evaluated, Zino 410's thermal design is by far the best, and it shows in how cool the system is under load. It is a pity that things could have been even better had Dell gone in with the choice of a 2.5" hard drive compared to the currently existing 3.5" one.

Originally published at https://www.anandtech.com/show/4185/dell-zino-hd-410-htpc-review (Wayback Machine).