Archive 1997–2024

Micca Slim-HD: 1080p In Your Pocket

Micca Slim-HD - The Works

The Slim-HD is based around the Boxchip F10, a new for 2010 SoC that’s pretty mysterious, all things considered. It’s based around the SoChip SC9800, which is another high-end PMP media player SoC. You can see a block diagram of the SC9800’s microarchitecture below.

But beyond the SC9800 base, not too much is known about the F10. We don’t have a clockspeed or anything else really - no datasheets to be found, no nothing. We do know that it has full 7.1 downmix capability along with performance roughly on par with the old Realtek 1073 series of SoCs. We expect it to be less powerful than most dedicated media streamer SoCs like the upcoming Realtek 10x5 and current Sigma 864x and 865x lines.

Further analysis of the Slim-HD logic board shows that it has a Samsung 512MB DDR SDRAM chip and a 2GB Hynix NAND chip. There is also an Analogix CoolHD ANX7150 HDMI transmitter, along with a JMicron high-speed USB-SATA bridge to make the connector side of things work.

We should note here that the WD TV Live Plus has the Sigma 8654 media processor inside, but also has a pretty beefy heatsink. Passively cooled, yes, but the Slim-HD does that one better by not having a cooling system. The SoC is just...there. No heatsinks, no vents, and definitely no fans. This was probably done in the interest of portability, and it seems to have paid off for Micca, given the size difference between the Slim-HD and the WD TV. Even without a real cooling mechanism, the Slim-HD is completely stable and doesn't heat up much at all, even during our strenuous test bench, which really points to the low power consumption of the F10 SoC.

Originally published at https://www.anandtech.com/show/4021/micca-slimhd-1080p-in-your-pocket (Wayback Machine).