Corsair AX750 80 Plus Gold: Putting Corsair's Best to the Test
Cables and Connectors
As already mentioned, the flat peripheral cables are a distinctive feature to Seasonic made PSUs. For the CPU and GPU connectors Corsair uses the usual cables and sleeving, and every surface and single connector are classical black.
| Cables and Connectors | ||
| Modular | Main | 20/24-pin 60cm |
| ATX12V/EPS12V | 4+4-pin 60cm / 4+4-pin 60cm | |
| PCIe | 2x 6/8-pin 60cm / 2x 6/8-pin 60cm | |
| Peripheral | 2x Molex: 45cm / 58cm / 71cm / 85cm | |
| 2x Molex to Floppy 10cm Adapter | ||
| 2x SATA: 45cm / 58cm / 71cm / 85cm | ||
| 2x SATA: 45cm / 60cm | ||
Cable lengths are reasonably long and the AX750 should work well in most cases, including full towers with bottom-mounted PSUs. The main 24-pin, 4+4 ATX12V/EPS12V, and PCIe harnesses all measure 60cm. There are two Molex/PATA and SATA harnesses with four plugs each, and two additional SATA harnesses with two connectors each. The longer harnesses are 85cm total while the two shorter SATA harnesses measure 60cm. With modern systems, Molex connectors are primarily used for fans and other peripherals, while SATA powers the HDDs/SSDs and optical drives.
The only potential issue is if you want to load up all the SATA connectors with a bottom-mounted PSU; the distance from the PSU to the first connector is only 45cm (give or take), with a fairly large 12-13cm gap between the connectors, so you'd want the HDD bays to be relatively close to the PSU rather than in the top portion of the case.
Originally published at https://www.anandtech.com/show/4011/corsair-ax750-80plus-gold (Wayback Machine).
