1000W-1200W Roundup: Five High-End PSUs
OCZ Z1000M Noise
| Sound Pressure Level | |
| Load | dB(A) |
| 10% | 18 |
| 20% | 18 |
| 50% | 20 |
| 80% | 22 |
| 100% | 25 |
| 110% | 29 |
The OCZ isn't very noisy at low loads, and 29dBA at 110% overload is decent for a 1000W PSU. From 0-80% load, this PSU is nearly silent. It may not be the most silent PSU we have ever seen, but we have seen (and will see again) louder offerings, including several in this roundup.
Efficiency and PFC
| 230VAC, 50Hz | ||
| Load | Efficiency | PFC |
| 10% | 84% | 0.804 |
| 20% | 89% | 0.852 |
| 50% | 91% | 0.915 |
| 80% | 91% | 0.943 |
| 100% | 89% | 0.954 |
| 110% | 88% | 0.960 |
| 115VAC, 60Hz | ||
| Load | Efficiency | PFC |
| 10% | 83% | 0.938 |
| 20% | 88% | 0.943 |
| 50% | 90% | 0.980 |
| 80% | 89% | 0.986 |
| 100% | 87% | 0.991 |
| 110% | 86% | 0.993 |
OCZ barely squeaks by and meets the 80Plus Gold requirement (87% on 115VAC, or 88% on 230VAC), but it's not quite at the same 90%+ range as some of the other PSUs. The results at 10% load are also good if not great. Interesting to note is that our measurements are slightly lower than the 80Plus organization's results.
Originally published at https://www.anandtech.com/show/3992/1000w1200w-highend-psuroundup (Wayback Machine).