Archive 1997–2024

550W Roundup: Three PSUs at Different Prices

OCZ Voltage Regulation and Quality

+3.3V regulation
Load Voltage
10% 3.39V (+2.72%)
20% 3.38V (+2.42%)
50% 3.34V (+1.2%)
80% 3.30V (0%)
100% 3.28V (-0.61%)
110% 3.24V (-0.91%)

 

+5V regulation
Load Voltage
10% 5.03V (+0.6%)
20% 5.02V (+0.4%)
50% 4.98V (-0.4%)
80% 4.94V (-1.2%)
100% 4.91V (-1.8%)
110% 4.90V (-2%)

 

+12V regulation
Load Voltage
10% 12.37V (+3.08%)
20% 12.34V (+2.83%)
50% 12.29V (+2.42%)
80% 12.25V (+2.08%)
100% 12.21V (+1.75%)
110% 12.15V (+1.25%)

+3.3V as well as +12V start very high with +2.7% and +3.1% over the desired value, though this isn't necessarily "bad". +5V starts lower, but there is not much room for the typical drop. Even at 110% overload all rails are still within specification, and +12V never drops below 12.15V, which is nice (particularly if you're pushing an overclock).

Ripple and Noise

+3.3V ripple quality
Load Ripple and noise
10% 14.10mV
20% 14.40mV
50% 20.80mV
80% 21.30mV
100% 27.90mV
110% 30.60mV

 

+5V ripple quality
Load Ripple and noise
10% 10.60mV
20% 16.10mV
50% 19.70mV
80% 27.10mV
100% 34.80mV
110% 40.90mV

 

+12V ripple quality
Load Ripple and noise
10% 23.30mV
20% 31.60mV
50% 34.40mV
80% 40.20mV
100% 55.80mV
110% 76.10mV

While the voltage regulation was good, the ripple and noise doesn't fare as well. 40.60mV is close to the 50mV limit on +5V; 76.10mV at +12V is okay but still worse than many other power supplies. The 30mV result on 3.3V is also near the limit. All are still within specification, but there's nothing particularly exceptional here; this is just average performance from any decent PSU.

Originally published at https://www.anandtech.com/show/3985/three-550w-psus-for-different-prices (Wayback Machine).