Archive 1997–2024

550W Roundup: Three PSUs at Different Prices

Techsolo Voltage Regulation and Quality

+3.3V regulation
Load Voltage
10% 3.35V (+1.52%)
20% 3.32V (+0.61%)
50% 3.23V (-2,12%)
80%  
100%  
110%  

 

+5V regulation
Load Voltage
10% 5.06V (+1.2%)
20% 4.99V (-0.2%)
50% 4.79V (-4.2%)
80%  
100%  
110%  

 

+12V regulation
Load Voltage 12V1/V2
10% 12.01V (+0.17%)/ 12.02V (+0.18%)
20% 11.99V (-0.08%)/ 12.02V  (+0.18%)
50% 11.93V (-0.58%)/ 11.90V (-0.83%)
80%  
100%  
110%  

Uh oh! As you can see, the PSU died after 50% load—the two main switches exploded! All the rails are still within specification at 50%, but you can see large voltage drops and +5V is close to the limit of -5%. +12V stays stable with more than 11.90V at all tested loads, but naturally the failure at 80% load is a major black mark.

Ripple and Noise

+3.3V ripple quality
Load Ripple and noise
10% 7.20mV
20% 7.70mV
50% 14.30mV
80%  
100%  
110%  

 

+5V ripple quality
Load Ripple and noise
10% 7.90mV
20% 11.70mV
50% 21.40mV
80%  
100%  
110%  

 

+12V ripple quality
Load Ripple and noise
10% 19.50mV
20% 32.90mV
50% 63.70mV
80%  
100%  
110%  

The ripple and noise results aren't that bad, but the ripple on +12V could be lower. 64mV is half of the spec, but we've seen worse results there. In fact, some $150 PSUs aren't better here, but deliver the full power and shut down if there is a problem. Again, the failure of the Techsolo at 80% is a key point; it may kill your hardware, so stay away from this product.

Originally published at https://www.anandtech.com/show/3985/three-550w-psus-for-different-prices (Wayback Machine).