Archive 1997–2024

Antec TruePower Quattro 1200W

External Impressions, Cables and Connectors

Usually, Antec power supplies have a simple looking case and color, but here we have two big red stripes ending with “1200”. Because of the wide area of rounded ventilation holes there is only room for a small connector panel. They use a lot of fixed cables, but that's not inherently bad as most users of a 1200W PSU will need most of them. There is no power switch, a typical but debatable practice from Enhance Electronics, the manufacturer of this unit.

Here you can see the OC-version with only slight differences overall, but good visible regulators.

Cables and Connectors
Fixed Main 24-pin 65cm
ATX12V/PS12V 4+4-pin
PCIe 2x 6/8-pin 50cm + 6-pin 15cm
Peripheral PATA 50cm + PATA 15cm + PATA 15cm + Floppy 15cm
SATA 50cm + SATA 15cm + SATA 15cm
Modular PCIe 2x 6/8-pin 50cm + 6-pin 15cm
Peripheral PATA 50cm + PATA 15cm + PATA 15cm + Floppy 15cm
PATA 50cm + PATA 15cm + PATA 15cm
2x SATA 50cm + SATA 15cm + SATA 15cm
SATA 50cm + SATA 15cm

The main connector of the TruePower Quattro is 65cm long. In addition you will get a 4+4-pin ATX12V and 8-pin EPS12V connector (both 65cm) as well as many cables for peripheral components. There are eleven SATA and nine PATA plugs. You also get two floppy connectors and more than enough PCIe plugs for your graphic cards. Another interesting feature is the Nippon Chemi-Con capacitor for all PCIe cables, called PowerCache. As Antec tells us, they are nice for critical moments like fast load changes, because they prevent short voltage drops. Of course, they will also help to reduce ripple and noise.

Originally published at https://www.anandtech.com/show/3807/antec-truepower-quattro-1200w (Wayback Machine).