Archive 1997–2024

Zotac ZBOX HD-ID11 Review: Next Gen ION is Better & Worse than ION1

Power Consumption & Noise

The move from the original Atom platform to Pine Trail dropped power considerably. The old Intel 945G chipset pulled more power than two dual-core Atom CPUs put together. The on-die GPU and NM10 Express chipset fixed that problem.

NVIDIA’s Next Generation ION platform increases power consumption over Pine Trail (and the original ION) because you’re adding a discrete GPU on top of the existing power budget of the platform. Thankfully it’s not a very power hungry GPU.

Power Consumption: NG-ION vs. ION
  Zotac ZBOX HD-ID11 (NG-ION) Zotac ZBOX HD-ND02 (ION1)
Idle 21.7W 19.7W
Load (Playing 1080p H.264) 27.0W 23.4W

Idle power is still in the low 20s and under load we saw the Zotac ZBOX HD-ID11 peak at around 27W. It’s a few watts more than the old ION.

There's a single heatsink + fan that's used to cool the CPU, GPU and NM10 Express chipset. At idle it's barely audible right next to the machine and unnoticeable from across the room. The problem is that the dual core Atom D510 can put out a decent amount of heat under full load. After a lot of testing the fan spun up to 6500 RPM and then noise is another issue entirely. I measured 55 dB(A) an inch away from the unit with the fan running at 6500 RPM. A foot away we're still at 50dB(A).

This situation only appears to happen with the CPU running at its max clock speed however. The XBMC Live image I installed doesn't seem to let the Atom cores underclock themselves to 600MHz when idle which results in heat building up very quickly. I suspect this is simply an issue of not having the right driver installed to enable EIST.

Under Windows 7, being used as a HTPC, the fan always remained quiet. But if you are constantly doing a lot of CPU intensive stuff, expect the system to get considerably louder.

Originally published at https://www.anandtech.com/show/3702/zotacs-zbox-hdid11-review-next-gen-ion-better-worse-than-ion1 (Wayback Machine).