Archive 1997–2024

ECS H55H-I Review: Mini-ITX at a Sensible Price

The H55H-I follows Intel’s standard H55/H57 mini-ITX layout.  CPU socket placement is very close to the PEG slot and the DIMM slots to the right, leaving most tower type coolers out of the equation if using tall DIMMs.

The SATA ports and front panel connecters are placed at the top left of the board along with the CMOS jumper. Given the overclocking options provided and the fact that ECS’ BIOS does not have any kind of safe-boot feature, a rear panel button would have been a better choice.

Power delivery is taken care of by a three phase circuit for VCC, while VTT and VAXG get one phase supplies repectively. We’d guess that all FETs used can pump out around 30 amps each, so not a lot of room for overclocking four core processors.

 

This is probably the most barren backside we’ve seen on a mini-ITX board to date. There's more than enough room to use coolers with backplates, although we can’t see many people wanting to do that.

 

Most of what you need is provided on the backplate, the only exception being PS/2 for those of you with older keyboards and mice.

Originally published at https://www.anandtech.com/show/3699/ecs-h55hi-miniitx-at-a-sensible-price (Wayback Machine).