Western Digital's New VelociRaptor VR200M: 10K RPM at 450GB and 600GB
- Posted in
- Storage
Performance Across All Tracks
Hard drives are made up of one or more circular platters. Platters are written from the outside inward in order to maximize performance (you cover more data in a single rotation of an outer track vs an inner track). I used HDTach to characterize the new VelociRaptor's performance across all LBAs:

Average read/write speed over the drive's capacity is around 130MB/s. The minimum sequential speed you'll see is around 90MB/s, while the maximum is over 140MB/s. The burst speed here is only 213.6 MB/s, which isn't enough to saturate 3Gbps SATA. In my tests, using the X58's 3Gbps controller yielded better performance with the new VelociRaptor than hooking it up to a 3rd party Marvell 6Gbps controller.
While hard drives are starting to embrace the 6Gbps standard, it's simply not necessary from a performance standpoint.
Originally published at https://www.anandtech.com/show/3636/western-digitals-new-velociraptor-vr200m-10k-rpm-at-450gb-and-600gb (Wayback Machine).