DFI P55 MI-T36: Little Cutie
- Posted in
- Motherboards
Board Layout

The lone PCI-E slot means that DFI needed to provide reasonable onboard sound and a desirable LAN solution. What you get is the Realtek ALC885 teamed up with Creative X-FI drivers and the Intel 82578DC for LAN duty.

Most of what you'll need is available on the rear I/O panel. You've got 6 USB connectors (one is eSATA combo), together with analog and digital audio outputs. There's also a CMOS clear switch available which comes in handy when OC recovery fails to work.
There are cutbacks in the VRM department. CPU VCC (VCore) is limited to 150W max on the current BIOS (future BIOSes will see OCP limited to around 90amps with a maximum VID of 1.40V). There is no cooling over any of the FETs either.


150w is just about enough to support a very mild overclock on a 750 CPU long term. 860/870 CPUs are probably best left near stock if you run heavy loads. Over-current protection should kick in if you push things a little too far, although we often find that it's better not to test the limits of OCP in the first place. DFI will be releasing BIOS shortly that limits OCP to around 110W, which is a smidgen above stock TDP - basically, you'll be limited to near stock operating frequency on all CPUs.

You get 3 SATA ports courtesy of the Intel P55 PCH. Front panel I/O for audio, USB, IrDA, and power are all placed above or to the right of the PCI-E slot together with the CMOS battery holder, allowing access to all connectors when the PCI-E slot is occupied. A hex post code display is placed to the right of the DIMM slots for debugging purposes.
Originally published at https://www.anandtech.com/show/2903 (Wayback Machine).