The SSD Relapse: Understanding and Choosing the Best SSD
- Posted in
- Storage
Early TRIM Support on Indilinx Drives
As I already briefly mentioned, Indilinx has added support for the TRIM instruction in an early firmware for OCZ and Super Talent drives. OCZ calls this firmware 1.42 while Super Talent sticks with the Indilinx label: 1711. Unfortunately, the firmware caused data loss if you put your machine to sleep and has since been pulled from both OCZ and Super Talent's websites.
When it was available, the firmware did work:
| SuperTalent UltraDrive GX 1711 | 4KB Random Write IOPS |
| Clean Drive | 13.1 MB/s |
| Used Drive | 6.93 MB/s |
| Used Drive After TRIM | 12.9 MB/s |
TRIM is triggered by two things it seems. Either deleting a file and emptying the recycle bin (to truly delete it) or formatting the drive. Simply deleting a partition doesn't TRIM the entire drive as I found out the hard way. During normal use, TRIM should deliver somewhere in the upper 90s in terms of percent of new performance.
There are significant limitations to TRIM at this point. The instruction only works in a supported OS (Windows 7 and some Linux builds) and only with supported drivers. Under Windows 7 that means you have to use a Microsoft made IDE or AHCI driver (you can't install chipset drivers from anyone else).
Unfortunately if you’re running an Intel controller in RAID mode (whether non-member RAID or not), Windows 7 loads Intel’s Matrix Storage Manager driver, which presently does not pass the TRIM command. Intel is working on a solution to this and I'd expect that it'll get fixed after the release of Intel's 34nm TRIM firmware in Q4 of this year.
Originally published at https://www.anandtech.com/show/2829 (Wayback Machine).