Archive 1997–2024

300W to 450W: 20 Power Supplies on the Test Bench

FSP Blue Storm II 400W


FSP power supplies sold under their own brand always come in the typical FSP blue paired with a golden fan grille. The Blue Storm II is also one of the older power supplies we are testing today, but it still tries to carry the standard for FSP. We have seen new topologies from FSP that look very interesting and hope they bring out new versions rated at less than 1000W. The Blue Storm II uses a very successful design that FSP has sold to many companies during the past several years. This particular unit might be one of the last survivors of that topology.


This design became famous since it was one of the first ones with heatsinks based on just a piece of aluminum without any fins. The lack of fins should make it difficult for the heatsink to dissipate heat into the air effectively, but somehow it works okay so we don't want to bash too much on this issue. The main capacitor is made by Ostor, which is often used by FSP and Seasonic. The secondary caps are made by CapXon, which we also see often in FSP power supplies. The marking on the PCB shows that this same design is used from 250W up to 500W. It's too bad that we haven't seen a 250W unit with this design in the market; we know many people that would be very happy with such a unit.

As the Blue Storm II is one of FSP's retail products, they equipped it a little bit better than the OEM models. It comes with six Molex and three SATA connectors of decent length. The 24-pin, 4-pin, and 6-pin PEG connectors have a length of 40cm, which is still not very long but better than cables as short as the OEM version. In standard FSP fashion, the cables are sleeved in blue and the PCI-E cable harness is in red.

Originally published at https://www.anandtech.com/show/2697 (Wayback Machine).