Archive 1997–2024

Audiophile Journeys with a PC

Case and Power

My preferred PSU is a high-speed ultra low noise regulator based on a design by Walt Jung. Again, this is a partial DIY kit that is provided by Peranders Sjöström and known as the JSR-03 regulator. The JSR-03 is used as a pre-regulator, outputting around 9V to the I2S and WM8741 modules. Although a 12V relay is present on the Doede PCB to select from PCM2707 or TDA1543 output, I found a 9V input perfectly capable of making the relay switch. The USB to I2S DAC has an onboard 6V regulator circuit that requires around a 2V margin to regulate effectively, so I'm within its bounds.


A Maplin KR56L Aluminum case provides ample room to house all the PCBs, with enough room left to add modules at a later date if required.

To provide the raw or pre-regulated DC, I use either a 12V Wal-Wart PSU or an 1800mAh 12V Li-On battery pack. Total current draw of all combined parts is in the region of 500mA, so the battery pack allows for around three hours of listening before needing a recharge. An alternative would be to buy a high capacity sealed lead acid battery, though I decided against that mainly due to the additional shelf room it would require. I only use the battery packs for critical listening and component comparisons. For normal everyday use, the battery pack is simply removed and input switched over to the Wal-Wart PSU. Subjectively, I find the battery input to provide cleaner, tighter bass notes, more perceived air throughout the mid-band and high frequency range, and better stereo imaging. It's not a smack in the face difference compared to the Wal-Wart PSU, as pre-regulation by the JSR-03 offers superlative noise rejection throughout the audible frequency range. Still, the difference is enough for me to accept the hassle of changing out and charging batteries for that last ounce of playback clarity.

If you're not interested in going to the nth degree of audio resolution, the Wal-Wart solution is probably the best way to go. You'll also find some discrete regulator solutions offered in package deals with these DAC kits on the DDDAC and Twisted Pear pages. Either of these options should lead to a very satisfactory performance, although the Jung based regulators have superlative paper specifications.

Originally published at https://www.anandtech.com/show/2677 (Wayback Machine).