Seasonic M12D 850W: DC-to-DC Perfection?
- Posted in
- Cases/Cooling/PSUs
Efficiency and PFC


We measured up to 89% efficiency using 230VAC, which is near the top of our efficiency charts. A few power supplies have managed 90% efficiency, but as we mentioned elsewhere a difference of 1% isn't very significant. Looking at lower input voltages, efficiency is still good but the curves aren't quite as nice, with 120VAC reaching 88% efficiency, but only for a very small range of loading. After reaching the peak efficiency, the curve on 120VAC drops pretty quickly.
The M12D doesn't support 90VAC, which is listed on a sticker next to the AC input. Normally we don't have any problems testing with 90VAC, but this particular power supply definitely doesn't work properly; voltages went up and down like a roller coaster, so we used 100VAC instead of the regular 90 for the above charts. At 100VAC, the efficiency curve looks even worse, reaching a peak value of 86% at 200W and then immediately dropping. Running a load of just 200W on an 850W power supply definitely wouldn't be the best use of your money, so if you need a lower input voltage we would look elsewhere.
Getting back to where this power supply really performs well, 230VAC delivers great results. Even with just 10% load (85W) the M12D still manages 85% efficiency, which is a fantastic result. In Europe, you can run everything from 80W up to nearly 900W and still stay above 85% efficiency. 120VAC is decent as well, staying above 83% efficiency from 80W up to 800W.

We have seen much better PFC results in other power supplies; particularly under 230VAC, this unit doesn't perform that well. It reaches a maximum of .98 -- still good, but not what most people would expect from a high-end unit. PFC with other input voltages is also lower than what we normally see.
Originally published at https://www.anandtech.com/show/2674 (Wayback Machine).