Archive 1997–2024

Seasonic M12D 850W: DC-to-DC Perfection?

Internals


Opening the casing reveals a completely different design than the usual Seasonic PSUs. It reminds us of the design we saw from Acbel in the Cooler Master UCP series, as well as Impervio units from OCZ and Silverstone. There are two large heatsinks that we saw earlier, plus a smaller one on the primary side. The filtering stage is located on a small sister PCB shielded with a copper plate, at the back of the secondary side. Power then routes through a cable to the main PCB into additional filtering, and from there into the PFC stage. There are two main Nippon Chemi-Con capacitors, each rated at 390µF and 400V. These capacitors are also rated at 105°C, which is higher than most companies use.


Moving over to the secondary stage, we find additional Nippon Chemi-Con capacitors between the cables that are attached to the PCB. Below the heatsink is another sister PCB that includes the DC-to-DC circuit. We think the Enermax design was a little better here, since it also contains the cable management sockets. That allowed Enermax to clean up the main PCB, whereas the Seasonic PCB looks a little cluttered. Regardless, the end result still works well and delivers good performance.

Originally published at https://www.anandtech.com/show/2674 (Wayback Machine).