EVGA 790i FTW
- Posted in
- Motherboards
Overclocking results
The 790i FTW was truly a mixed bag for us. We did not manage to find any real consistency when running the board above stock settings. We tried three different BIOS revisions; each presented us with a series of quirks ranging from the infamous FSB holes to voltage irregularities. We also managed to lose two OS installations in the process of overclocking. If you do intend to push the board, do yourself a favor and either make a complete drive image or stick to using a "medieval" IDE hard drive.
We also had to resort to using 1GB memory modules for most of our testing. Our 2x2GB Corsair XMS3 1600MHz kit was limited by the FSB holes present in the current BIOS releases. This led to us staying under 400FSB or shooting over 460FSB to get the board to boot. The Corsair kit can run at 1800 stable on other boards and probably on capable 790i boards too. In this instance, the FTW's FSB boot up requirements pushed the modules was outside their capabilities, so we never got to run any form of stability testing near 1800MHz.
On a more positive note, we did manage to scrape out a run of Crysis with an E8500 at 545FSB at 1280X1024 resolution, but the board would not pass a test run at 1920X1200.
![]() |
We tried going over to 550FSB with the memory running at 1800MHz, but once again lost our OS installation. 545FSB was more or less our benchmarking limit with water-cooling and we managed to scrape out a run of 3DMark05 without any problems.
![]() |
Where's the Subzero Stuff?
Unfortunately, our board would not cooperate when we strapped a cascade to the CPU. The problem was that the board refused to boot any time we moved away from stock settings. We had to clear the CMOS by removing the battery and shorting the clear jumpers near the BIOS chip. The board would then boot back up at stock defaults, even with the cascade idling at -118C (so it's not a cold board bug).
The 790i FTW is still on the test bench and we are prepared to give it another spin if EVGA can send us an improved BIOS. It would have been interesting to run some single and dual GTX 280 cards with this board and our QX9650, but we found that getting things to work with subzero cooling proved to be impossible. This review was delayed while we tried in vain to get to the crux of what was wrong. In the end, we made a decision to go with what we have, so people who are thinking of purchasing the board know what they're getting into if they take the plunge right now.
Originally published at https://www.anandtech.com/show/2660 (Wayback Machine).

