Archive 1997–2024

Corsair TX750W Power Supply

Efficiency and PFC


As mentioned already, we did not expect to see extremely high efficiency, since previous CWT manufactured power supplies generally top out at 85%. 230VAC reaches that same efficiency, but efficiency with lower input voltages is far worse, particularly in terms of the curve -- the 120VAC and 90VAC inputs both show a precipitous drop after around 400W. Differences between the three curves is rather startling, hitting two different recommendations for ideal loads. With 230VAC, you can easily run this power supply with anything from a 130W to a 700W load, which is a very large range. For 120VAC, the range shrinks to 130W to 500W for best efficiency. If you happen to use 90VAC, you would probably be best served by a different power supply, but you can at least get above 80% with a load of 200W to 500W.


Power factor correction is always much higher with lower input voltages, but people in Europe will have to make do with only .97 at medium load. The PFC results for the TX750W are definitely worse than many of the other power supplies we've tested, particularly with 230VAC.

Originally published at https://www.anandtech.com/show/2655 (Wayback Machine).