Antec Fusion HTPC Shootout
- Posted in
- Cases/Cooling/PSUs
Antec Fusion Remote Black Performance
We attached temperature diodes to the CPU cooler (as close as we could get to the area where it makes contact with the CPU), the chipset heatsink (IGP graphics), on top of the hard drive, and hanging in the middle of the chassis between the front and CPU cooler for the ambient readings.

Somewhat interesting is that the temperature reading from the CPU is one degree higher than in the Micro Fusion case, but again the temperature didn't change with any of the three fan settings. The motherboard chipset on the other hand is quite a bit cooler than in the Micro Fusion, because of the increased airflow from the larger 120mm fans. This also results in good readings for both the hard drive and the ambient temperature.

Putting a load on the system doesn't change temperatures all that much. The CPU temperature is the same in idle and load conditions. The only area where we see even a moderate increase is on the chipset, which is about 4°C hotter under load. The temperatures are all clearly better than on the Fusion Micro, so the dual 120mm fans are doing their job and providing excellent airflow. Of course, adding additional components like a faster GPU -- which is more feasible on this case -- would alter the results somewhat.
Originally published at https://www.anandtech.com/show/2637 (Wayback Machine).