Archive 1997–2024

Antec Fusion HTPC Shootout

MT-350W Power Supply Continued


The temperatures all stay at reasonable levels, which is good for such a small unit. The maximum temperature but we measured inside the PSU was only 60°C during normal operation, so it should work very well for the intended market. We measured up to 34°C ambient temperatures in our test system; in actual use, that will slightly increase the power supply temperatures, but we also don't expect most users to come anywhere near the maximum load we tested here. Most HTPC systems will fall closer to the 50% mark (or lower), so power supply temperatures and longevity should not pose any concerns.








The other areas of the power supply results are all good, but voltage regulation shows some tremendous drops, especially on the lower voltage rails. All of the rails stay within specs, but we wouldn't recommend running 80% load or higher. Both of the 12V rails are almost equal in voltage distribution, differing only by a few millivolts. The largest drop on the rails is around 4%.






Ripple and noise testing shows very good results -- certainly nothing to be concerned about.

Originally published at https://www.anandtech.com/show/2637 (Wayback Machine).