Archive 1997–2024

FSP Epsilon 80Plus 600W

Conclusion

As expected, the build quality of this unit is excellent. There is literally nothing to complain about. The Epsilon 80Plus 600W is a good power supply, but there's very little in the way of marketing. Unfortunately, that's typical of larger companies like FSP Group. Smaller companies like Corsair, OCZ, and be quiet! provide similar quality but have huge marketing departments. They tend to know much more about the specific markets than the actual manufacturers.

We see this lack of market knowledge when we look at the connectors of this unit. It comes with 24-pin, 4-pin ATX12V, and 4/8-pin EPS12V connectors, which is fine for the rated output. Six Molex and six SATA connectors are the minimum we would expect, and for a 600W power supply it might even be enough. The two PEG connectors are the bigger concern, as that would make this power supply under-equipped for anyone looking to run two 9800 GTX cards in SLI, or two HD 4870 cards in CrossFire. Then again, SLI/CrossFire certification for the higher-end GPUs requires a higher rating anyway. As it stands, this power supply will be fine for single graphics cards configurations, including cards like the 3870X2 and 9800GX2, or dual-cards like the 8800 GT and HD 4850 that only require a single PEG connector.

As for the internals, we can't really blame FSP for not mixing things up, since the design is a few years old and has sold very well. It still delivers good results and can compete with the competition. The voltage regulation was great and stayed tight throughout the tests. Efficiency is also good with input voltages of 115VAC or more, though the 90VAC results are nothing special. The maximum 87% efficiency at 350W is a very competitive result.

The fan starts at a somewhat high speed of 1100RPM, but this still results in a good sound reading of just 18dB(A). Unfortunately, this scales to the maximum 27dB(A), and particularly in higher temperature environments it will hit that point at relatively low loads. That's still good compared with some other power supplies, but a 600W PSU can run at much lower noise levels as we have seen before. For a price of around 100€, users in Europe can purchase a well built unit which should run quite well. There are competitors that offer a similar feature set, quality, and performance, but frequently prices are higher. If you don't need anything more than a 600W PSU, this FSP is worth a look. If you're going to purchase an FSP-built PSU, you might as well go straight to the source.

Originally published at https://www.anandtech.com/show/2581 (Wayback Machine).