Archive 1997–2024

AMD's Phenom X4 9950, 9350e and 9150e: Lower Prices, Voltage Tricks and Strange Behavior

More Problems?

The Phenom’s flaky Cool'n'Quiet performance in some of our benchmarks forced us to test with it disabled, unfortunately with it disabled we ran into another problem: stability.

Gary originally wrote about this in his Postcards from the Edge blog. Many mainstream motherboards ship with low cost 3-phase power delivery circuitry, which is unfortunately insufficient to handle the current draw of AMD’s very high end 125W and 140W TDP processors. Despite the problems Gary initially encountered with many early boards (both AMD and Intel platforms), many manufacturers continue to certify 125W processors like the Phenom X4 9850 BE on their mainstream boards.

While it’s unlikely that a user would drop a 9850 into a 780G motherboard, it is possible that someone would take a Phenom X4 9550 and attempt to overclock it too far on a 780G - resulting in the same problems.

With Cool'n'Quiet enabled, our power load on our testbed Gigabyte 780G was just fine - the motherboard had no problems uneventfully completing our entire test suite. However, with CnQ disabled as we had to do in order to get the best performance results out of Phenom our 780G board was noticeably less stable. While it completed most tests without issue, we couldn't complete a run of Windows Media Encoder 9 without cooling the power delivery circuitry on the motherboard. A simple case fan did the trick:

The Cool'n'Quiet issues we encountered clearly have much further reaching implications than erratic performance in a few benchmarks.

Originally published at https://www.anandtech.com/show/2559 (Wayback Machine).