Enermax Launches the Pro82+ and Modu82+
- Posted in
- Cases/Cooling/PSUs
Modu82+ Cables and Connectors

As already stated, Enermax has two red jacks for the PEG connectors and five for peripheral connectors. The 425W version (which is not included in today's test) only has four peripheral jacks. The 525W and 625W models have different harnesses in the package. The bigger brother comes with five harnesses, and two of these include have two Molex and a floppy connector. The other three harnesses each have three SATA connectors, providing up to nine SATA power connectors. All the harnesses are sleeved with Enermax's standard black mesh with a golden thread. There is one 4-pin and one 8-pin ATX 12V connector available, which is a nice addition instead of an 8-pin connector that can be split in half to get a normal 4-pin connector.



Enermax designed new connectors for easy unplugging. To unplug the connectors you only need to depress the hooks on the two sides. Then you can easily pull the connector out of the jack. The 12-pin connectors are one of the latest additions from Enermax, and they waste no time in advertising it. The idea is that the 12-pin jack with six 12V pins and six ground pins can be modified for future needs. All the company has to do is design a new plug that uses these pins in a different way. If a new connector for CPUs and/or GPUs comes out, Enermax can easily use the old jack on the power supply and sell users a new harness with the correct connectors on it.

The included harnesses are rather short with the Modu82+ series. Otherwise, it has everything a midrange to high-end users could wish for, with the ability to power a nice graphics card setup. You won't be able to power a huge number of HDDs or optical drives, but six will be more than sufficient for normal users. As shown on the above graphic, all four PEG connectors are able to act as a 6-pin or 8-pin connectors.


The installed fan is the same in all versions of this series. We have a double ball bearing fan that runs extremely silent. At 500 to 1000 RPM, this fan is not audible from three feet away; only when you put your ear right next to the fan can you will hear a very calm dragging noise.
Originally published at https://www.anandtech.com/show/2487 (Wayback Machine).