Enermax Launches the Pro82+ and Modu82+
- Posted in
- Cases/Cooling/PSUs
Pro82+ Internals
In the following images, we will show the smaller 385W PSU, as these versions will be different from the higher wattage versions. Other than the lack of cable management, there's not much difference between the Pro82+ and Modu82+.

When we open up the casing, we are greeted by almost complete emptiness. Rated to deliver slightly less than 400W, there's little need for more complex layouts with many extra components, unlike the 625W models.

The filtering stage seems equally equipped, as we have seen before. All the necessary components are there, though it's a little more sparse than in larger PSUs.


The primary side features a single main capacitor instead of the two we saw in the bigger versions. That makes sense, as there is simply no need for more than this. With 220µF and 400V, the capacitor is not big but it's enough for this power supply. Enermax went with a Hitachi capacitor on this side. Hitachi can be found in most modern high-end power supplies, and they provide very good quality and performance. The choke is attached to the heatsinks and hangs from the side. The solder joints in general aren't that great with Enermax, but everything seems to work out fine.
Originally published at https://www.anandtech.com/show/2487 (Wayback Machine).