Archive 1997–2024

Intel's 8-core Skulltrail Platform: Close to Perfecting the Niche

More on the Motherboard

Our last bit of praise for the D5400XS are mostly minor things that all add up. The board features no legacy ports, you've got a few USB and eSATA ports on the back panel but no PS/2 in sight.

Just like some high end enthusiast boards Intel outfitted the D5400XS with power and reset switches on board, which make our lives much, much easier.

The layout itself is cramped but well done, largely thanks to the fact that the motherboard is an extended ATX form factor design. Yes, you'll most likely need a new case for it.

Power requirements will vary depending on your configuration. Below we have Intel's recommendations:

Our OCZ 1kW unit worked just fine and it's worth noting that peak power consumption with a single GPU never exceeded 343W. Adding a second GPU still kept things under 500W, and while we'd stress that sticking with Intel's recommendations is a good thing, the power requirements of Skulltrail aren't nearly as ridiculous as you'd expect. Our 3-way SLI testbed needed much more. When 4-way CrossFire X support is enabled however, you may need to look at upgrading to a 20A circuit in your office. Keep in mind that despite the two 8-pin 12V power connectors on board, only one is necessary for basic operation. Intel recommends a power supply with two 8-pin 12V power connectors if you plan on doing any serious overclocking.

We were quite happy with the D5400XS' BIOS, it gave us access to all of the basic overclocking features we needed but still falls short of being the sort of amazingly tweakable motherboard that the high end enthusiast market demands. Given the target market of the D5400XS, its BIOS should be more than enough though. Other than a horrendously laggy interface typical of most Intel BIOSes, it's simple to overclock which is very helpful given how well the QX9775s do overclock.

Intel isn't releasing pricing information on the D5400XS, but we're told to expect pricing similar to other workstation motherboards. We'd hazard a guess of around $500 but we should know for sure in the next month or so.

Originally published at https://www.anandtech.com/show/2435 (Wayback Machine).