Archive 1997–2024

PC Power & Cooling Turbo Cool 860W: Special AnandTech Edition

Test Setup, Output Stability, and Ripple Noise

As always, we have tested this power supply with our Chroma ATE. The Chroma enables us to put a specific amount of load to each of the rails.

Note: If you would like to know more about our testing methodology, equipment, and environment, please read our PSU testing overview.

We have added an additional 10% on the highest load to see how the units handle overload situations. We continue to use this test as a worst-case scenario. The overload test will starts at room temperature, and to avoid being too cruel we keep the ambient temperature at a maximum of 50°C. Experience shows that many units can stand the overload in room temperature but will show problems with higher temperature and overload together. Only the best units will survive this test without any difficulties.



DC-Outputs







The stability of the 12V rail is quite impressive showing only a 2% deviation. The lower voltage 3.3V and 5V rails are a little higher with a little over 4% of regulation. The measured ripple/noise were very impressive with the 12V rail and is about 2.8mV under average load measured at 230VAC. The other rails perform well, with only slightly higher results.

Originally published at https://www.anandtech.com/show/2433 (Wayback Machine).