Archive 1997–2024

Power Supply Roundup: Eight 1000W for the Extreme Users

Antec TruePower Quattro 1000W (TPQ 1000)



We tested the 850W version of this series in our last roundup and it performed very well throughout the test. Antec also sent us their 1000W unit to compare it to other similar units. As we mentioned before, the appearance of this particular design is unique with the racing stripe theme. That sets this unit apart from the "boring" black we see everywhere else, but for users without case windows none of this really matters. Antec is one of two companies with a single 80mm fan installed for cooling purposes; this is not necessarily a bad thing, as the internal design will determine whether this cooling is effective. 80mm fans are not necessarily louder than 120mm fans, but they do need to spin at higher speeds in order to move the same amount of air. The package is well made and you will find all necessary accessories for installing this unit.



The label isn't very different from the label of the 850W version. All the max outputs show the same values; the only difference is the max combined power of 840W here where we had 768W on the 850W unit. The combined power of the lower voltage rails of 3.3 and 5V is also 20W higher, which isn't much of a change.



The cable harnesses and connectors are the exact same as the 850W unit. There are eight SATA and nine Molex connectors, which provides plenty of choice for the end-user. However, as the 850W unit there are only three jacks for the peripherals, so you won't be able to use all 17 connectors. Still, it's nice for Antec to give users the choice of how many of each connector will be present. PCI Express graphics cards can be powered up with two 6-pin and two 6/8-pin PEG connectors, which is enough for a high-end SLI/CrossFire setup.



Even though the power supply is manufactured by the same company that builds the Akasa and Silverstone units, we see slight differences in the internal design. The heatsinks have a different shape, which is necessary given the different cooling setup that uses one 80mm fan. The heatsink is now thick and large, designed to work with the pull of the fan instead of the push method seen in other PSUs where the air blows at the heatsinks from below. The main capacitor is made by Hitachi, which is also a little better. It's not very often today that a company provides partial cable management and still uses an 80mm fan. The problem is the jacks at the back of the unit, which obviously block airflow. Antec manages to keep the jacks as low as possible so there is enough air coming through the front vents for good cooling. We will wait to pass judgment on noise levels, however.

Originally published at https://www.anandtech.com/show/2395 (Wayback Machine).