Power Supply Roundup: Eight 1000W for the Extreme Users
- Posted in
- Cases/Cooling/PSUs
Product Comparison: Voltage Ripple/Noise
For voltage ripple/noise testing, we conducted measurements at three load levels (20%, 50%, and 100%). The top row contains the ripple results on the 3.3V, 5V, and 5VSB rails and the bottom row contains the 12V rail(s). We have to confess that we broke the Kingwin unit when we dismantled it (Ed: Note to readers - don't try this at home!), and afterwards we discovered some issues with our initial ripple testing. We are thus unable to include ripple results for that unit.
Akasa PowerMax 1000W (AK-P100FG)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Antec TruePower Quattro 1000W (TPQ 1000)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Enermax Galaxy DXX 1000W (EGX1000EWL)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
OCZ ProXStream 1000W
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Silverstone Strider 1000W (ST1000-NV)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Thermaltake Toughpower 1000W (W0132RU)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Ultra X3 1000W
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Akasa has a very nice output quality of just up to 8mV on the 12V rails. The Enermax Galaxy at lower loads shows just around 4mV on all of the 12V rails, and with higher loads of 1000W we measure just 18mV tops. OCZ's outputs don't rise higher than 10mV on the lower voltage rails and up to 20mV on one of the 12V rails. The Silverstone Strider has clean output of just up to 8mV at full load. The best quality shown today comes from Ultra where we measured not more than 2mV at any load on the 12V rail; the lower voltage rails have no more than 12mV. Overall, the power supplies all provide very nice and clean output.
Originally published at https://www.anandtech.com/show/2395 (Wayback Machine).









































