Archive 1997–2024

400-450W PSU Roundup

Antec DC Outputs

Antec Earthwatts 430W
PSU Load 3.3V 5V 12V1 12V2 Wattage
All Rails
10% 1.34A 1.34A 1.28A 1.28A 46W
20% 2.68A 2.68A 2.57A 2.57A 87W
50% 6.70A 6.70A 6.42A 6.42A 208W
80% 10.72A 10.72A 10.27A 10.27A 340W
100% 13.40A 13.40A 12.84A 12.84A 422W
110% 14.74A 14.74A 14.12A 14.12A 461W





The voltage distribution is good and we didn't encounter any problems. The 3.3V rail starts a little high at around 3% over the ideal of 3.30V, while the 5V rail starts at the ideal and drops down to the 5% specification limit at the highest loads. Both rails remain within specs, however. The 12V rail behaves similar to the 3.3V rail. It starts above 12.00V and drops to 3% below ideal.


The efficiency is good but not great, reaching 84% at medium load. It is rare to see that at medium load the unit reaches the same efficiency with both 120VAC and 230VAC. However, while the folks in Europe can be happy about good efficiency throughout the loading range (we measured more than 80% at any load above 85W), 120VAC users as usual will get lower efficiency at higher power draws.

Ripple & Noise Results







Originally published at https://www.anandtech.com/show/2371 (Wayback Machine).