400-450W PSU Roundup
- Posted in
- Cases/Cooling/PSUs
Ultra PFC, Temperature, Fan Speed, and Acoustics


The small heatsinks don't seem to have any problem with room temperature, with the secondary heatsink reaching 68°C. In the heat chamber things up quite a bit worse, with temperatures increasing with every minute of testing. At least the airflow is managing to remove a lot of heat, as seen by the 87°C exhaust temperature. Given the results on the previous page, however, we would recommend against using this power supply in any situation where it is running at a load of more than 250W.


With a maximum speed of 2500 RPM, the fan is not the fastest model out there and therefore it's also quiet. It starts with a low rotational speed and only 20dB(A) and reaches its maximum noise level of 32dB(A) at 80% load.

Needless to say, Europe will not allow the sale of this unit since there are tight restrictions for PFC.


The small heatsinks don't seem to have any problem with room temperature, with the secondary heatsink reaching 68°C. In the heat chamber things up quite a bit worse, with temperatures increasing with every minute of testing. At least the airflow is managing to remove a lot of heat, as seen by the 87°C exhaust temperature. Given the results on the previous page, however, we would recommend against using this power supply in any situation where it is running at a load of more than 250W.


With a maximum speed of 2500 RPM, the fan is not the fastest model out there and therefore it's also quiet. It starts with a low rotational speed and only 20dB(A) and reaches its maximum noise level of 32dB(A) at 80% load.

Needless to say, Europe will not allow the sale of this unit since there are tight restrictions for PFC.
Originally published at https://www.anandtech.com/show/2371 (Wayback Machine).