Archive 1997–2024

µATX Part 2: Intel G33 Performance Review

MSI G33M: Overclocking

Click to enlarge

On the MSI board we ended up at a final 9x300 FSB setting for either the integrated graphics or external GPU solution with the E2160, resulting in a clock speed of 2702MHz with a CPU voltage setting of 1.425V. The board would not POST above 9x315. We could not run at memory dividers other than 1:1 with this combination either; any change would result in a no POST condition. Our final memory speed was DDR2-751 with timings at 5-5-5-15. CAS4 settings would not work when overclocking the board with the integrated graphics solution. Vdroop was decent with a loss of around .02~.03V during load testing.

Click to enlarge

We had no issues getting our E6550 to clock up on this board and had a final setting of 7x485 resulting in a CPU speed of 3393MHz. However, the board needed an increased CPU voltage in order to reach this setting. We set the voltage to 1.475V, which with this CPU is the limit of our air cooling solution, but the board decided to increase voltage to 1.50V or sometimes to 1.525V. We decreased our voltage to 1.450 and it would generate the same behavior, although the temperatures were still in check so we stayed with this maximum setting. We ran the memory at DDR2-970 with timings at 5-5-5-15 at 2.10V.

Click to enlarge

This board also had no issues with the Q6600 and we stayed at the 9x400 setting with a final CPU speed of 3600MHz at 1.425V -- slightly higher than the ASUS board. Memory was set to DDR2-1000 at 5-5-5-15 settings. This board reached 9x425 at 1.475V before we had to shut it down due to soaring temperatures.

Originally published at https://www.anandtech.com/show/2339 (Wayback Machine).