Archive 1997–2024

Enermax Infiniti 650W

Internals


Opening the power supply, we are greeted with a nicely arranged interior. The filtering stage is actually located on an extra PCB directly in front of exhaust area (at the right in the above image). A nice detail is that the small PCB is not the same length/height as the main PCB; this means that air will be able to circulate under the main PCB and potentially provide better cooling. The design also means that unlike other designs (i.e. the Zippy Serene), no components are hindering air from coming through, potentially causing some turbulence.



The PFC stage contains the main cap from Hitachi rated at 390µF and 400V. The rectifier bridge also gets an extra little golden heatsink.




The secondary side looks a little crowded, which is a pretty common trait with many other power supplies as well. Most of the cables block the airflow, limiting the ability of the fan to cool components in this area.



All the safety features are supplied by a small chip sitting on a PCB near the cables; this chip is from the Taiwanese company Silicon Touch Technologies, which is the same as most other Enermax PSUs. It works fine and we haven't encountered problems with it so far.

Originally published at https://www.anandtech.com/show/2324 (Wayback Machine).