Archive 1997–2024

Thermalright Ultima-90: Small Wonder?

Overclocking

As cooling solutions do a better job of keeping the CPU at a lower temperature, it is reasonable to expect the overclocking capabilities of the CPU will increase. In each test of a cooler we measure the highest stable overclock of a standard X6800 processor under the following conditions:

CPU Multiplier: 14x (Stock 11x)
CPU voltage: 1.5875V
FSB Voltage: 1.30V
Memory Voltage: 2.00V
nForce SPP Voltage: 1.35V
nForce MCP Voltage: 1.7V
HT nForce SPP <-> MCP: Auto

Memory is set to Auto timings on the 680i and memory speed is linked to the FSB for the overclocking tests. This removes memory as any kind of impediment to the maximum stable overclock. Linked settings on the 680i are a 1066FSB to a memory speed of DDR2-800. As the FSB is raised the linked memory speed increases in proportion. The same processor is used in all cooling tests to ensure comparable results.

Highest Stable Overclock (MHz)

The Thermalright Ultima-90 reaches a stable 3.90 GHz, matching the top performers we have tested like the Tuniq 120, Thermalright Ultra-120, Scythe Infinity with push-pull fans, and the Scythe Ninja Plus B/OCZ Vindicator running a high output SilenX IXTREME fan. The only air cooler that outperforms the Ultima-90 in overclocking is its big brother - the Ulltra-120 eXtreme.

These results are with a high output 120mm fan. Results with a 92mm fan are slightly lower, with a top overclock of 3.87GHz. As seen in the scaling charts the 120mm and 92mm fan results are almost the same to the top of the speed charts. Cooling performance is also about the same with either a 120mm or 92mm driving. However, the 120mm fan allows a slightly higher overclock.

If wattage is considered, a stock X6800 consumes about 75 watts, where the 3.83GHz OC pulls about 150 watts - double the amount required at stock speed. At the voltage required for stability at 3.90 GHz with a 120mm fan, the CPU wattage is around 161W. The highest air result ever with this CPU at 3.94GHz translates into about 165W, where the 92mm top of 3.87GHz translates into around 158W. Considering the smaller size and reduced weight of the Ultima-90, this performance can only be considered outstanding.

Note that a C2D pushed to the incredible overclocks they can reach draws a lot of power, and our cooling test is designed to find where the top coolers fail. Keep this in mind when looking at our cooling results. Many of the middle coolers in our roundup have done very well when tested with AMD processors or with less demanding cooling test procedures.

Originally published at https://www.anandtech.com/show/2305 (Wayback Machine).