ZEROtherm BTF90: Sting like a Butterfly?
- Posted in
- Cases/Cooling/PSUs
Cooling at Stock Speed
Some users will never overclock their CPU, but they still want to run the coolest CPU temperatures possible to enhance stability and extend CPU life. The ZEROtherm BTF90 uses a 4-pin connector to allow the motherboard to control fan speed. The supplied fan is a standard 92mm size, but it is embedded and not user changeable.

Where the very good Intel stock cooler keeps the X6800 at 41C at idle, the BTF90 manages 30C. This is a significant improvement over the Intel stock cooler performance at 41C, but the results are average among top air coolers tested at AnandTech. The Thermalright coolers, at the top of our heatpipe tower performance charts, cool to 26C and 27C, and the Tuniq 120 maintains 27C. The BTF would likely do better if the fan were run at maximum speed at idle, since the speed is auto controlled by the temperature of the processor. Still, the performance is quite good for a cooler using a 92mm fan running at its slowest speed.
It is more difficult to effectively simulate a computer being stressed by all of the conditions it might be exposed to in different operating environments. For most home users CPU power is most taxed with contemporary gaming. Therefore our stress test simulates playing a demanding game.
The Far Cry River demo is looped for 30 minutes and the CPU temperature is captured at 4 second intervals with the NVIDIA Monitor "logging" option. The highest temperature during the load test is then reported. Momentary spikes are ignored, as we report a sustained high-level temp that you would expect to find in this recording configuration. This test configuration roughly equates to an 80% CPU load test using Intel TAT.
Cooling efficiency of the ZEROtherm BTF90 was then compared under load conditions at stock speed to the retail HSF and other recently tested CPU coolers.

The BTF90 under load at stock speeds reached a maximum temperature of 40C with the included fan at highest auto speed. This compares to the Thermalrights at 32C and 33C, the Tuniq at 34C, and the cooler Master Hyper 6+ and Zalman 9700 at 36C. Stock load performance is average among tested coolers. This is really a very good performance for a cooler using a 92mm fan when you consider that almost every other air cooler tested at AnandTech uses a 120mm fan for cooling.
Some users will never overclock their CPU, but they still want to run the coolest CPU temperatures possible to enhance stability and extend CPU life. The ZEROtherm BTF90 uses a 4-pin connector to allow the motherboard to control fan speed. The supplied fan is a standard 92mm size, but it is embedded and not user changeable.

Where the very good Intel stock cooler keeps the X6800 at 41C at idle, the BTF90 manages 30C. This is a significant improvement over the Intel stock cooler performance at 41C, but the results are average among top air coolers tested at AnandTech. The Thermalright coolers, at the top of our heatpipe tower performance charts, cool to 26C and 27C, and the Tuniq 120 maintains 27C. The BTF would likely do better if the fan were run at maximum speed at idle, since the speed is auto controlled by the temperature of the processor. Still, the performance is quite good for a cooler using a 92mm fan running at its slowest speed.
It is more difficult to effectively simulate a computer being stressed by all of the conditions it might be exposed to in different operating environments. For most home users CPU power is most taxed with contemporary gaming. Therefore our stress test simulates playing a demanding game.
The Far Cry River demo is looped for 30 minutes and the CPU temperature is captured at 4 second intervals with the NVIDIA Monitor "logging" option. The highest temperature during the load test is then reported. Momentary spikes are ignored, as we report a sustained high-level temp that you would expect to find in this recording configuration. This test configuration roughly equates to an 80% CPU load test using Intel TAT.
Cooling efficiency of the ZEROtherm BTF90 was then compared under load conditions at stock speed to the retail HSF and other recently tested CPU coolers.

The BTF90 under load at stock speeds reached a maximum temperature of 40C with the included fan at highest auto speed. This compares to the Thermalrights at 32C and 33C, the Tuniq at 34C, and the cooler Master Hyper 6+ and Zalman 9700 at 36C. Stock load performance is average among tested coolers. This is really a very good performance for a cooler using a 92mm fan when you consider that almost every other air cooler tested at AnandTech uses a 120mm fan for cooling.
Originally published at https://www.anandtech.com/show/2299 (Wayback Machine).