Silverstone Decathlon DA650: A modular alternative
- Posted in
- Cases/Cooling/PSUs
Transformers and Secondary Side

Somewhat unusual, and just like the Olympia OP650, the Decathlon DA650 has two main transformers. Both run in tandem to provide all rails simultaneously. Other manufacturers use the first transformer to power one rail along with the secondary transformer, which then powers the remaining rails.

The PCB that houses the jacks for the modular cable sockets looks very clean from the back. Silverstone attached all the DC outputs to this PCB, so having a high quality design is important for providing clean transfers. We have seen cable management PCBs that look a lot worse from other manufacturers, for example those from Andyson.


The secondary side shows similar quality. The cables are neatly attached to the board and the PCB has enough space so that it doesn't get bent or torqued. The smaller PCB includes the OCP protection features, the PWM control, and the fan speed control.


It's a pity that Silverstone's engineers had to cut off such a big piece from the secondary heatsink, since as we will see its performance is clearly not as good as the primary heatsink. Not only is it shorter but half of the horizontal fins are also cut off, resulting in greatly reduced surface area. The cables are nicely connected to the modular PCB, but we're a bit surprised that Silverstone didn't come up with a design that omits more of the internal cables. The Enermax liberty for example only uses a few internal cables to power the cable management PCB, and if Silverstone had taken a similar approach they could have made room for a larger secondary heatsink. We have seen this from other companies like OCZ as well.

The secondary capacitors are made by Taepo.

Somewhat unusual, and just like the Olympia OP650, the Decathlon DA650 has two main transformers. Both run in tandem to provide all rails simultaneously. Other manufacturers use the first transformer to power one rail along with the secondary transformer, which then powers the remaining rails.

The PCB that houses the jacks for the modular cable sockets looks very clean from the back. Silverstone attached all the DC outputs to this PCB, so having a high quality design is important for providing clean transfers. We have seen cable management PCBs that look a lot worse from other manufacturers, for example those from Andyson.


The secondary side shows similar quality. The cables are neatly attached to the board and the PCB has enough space so that it doesn't get bent or torqued. The smaller PCB includes the OCP protection features, the PWM control, and the fan speed control.


It's a pity that Silverstone's engineers had to cut off such a big piece from the secondary heatsink, since as we will see its performance is clearly not as good as the primary heatsink. Not only is it shorter but half of the horizontal fins are also cut off, resulting in greatly reduced surface area. The cables are nicely connected to the modular PCB, but we're a bit surprised that Silverstone didn't come up with a design that omits more of the internal cables. The Enermax liberty for example only uses a few internal cables to power the cable management PCB, and if Silverstone had taken a similar approach they could have made room for a larger secondary heatsink. We have seen this from other companies like OCZ as well.

The secondary capacitors are made by Taepo.
Originally published at https://www.anandtech.com/show/2296 (Wayback Machine).