Silverstone Decathlon DA650: A modular alternative
- Posted in
- Cases/Cooling/PSUs
Cables, Connectors, and Fan



As we know from previous experience, Silverstone likes to attach all the cables to the PSU before shipping. The Decathlon DA650 is no different. The cable harnesses are sleeved up to the first connector. After the first connector, the cables are left blank without even cable ties. The jacks are located on the upper half of the front side of the PSU. Below the jacks is a little graphic that shows each jack with the appropriate connector name. With all the cables disconnected you can see how Silverstone installed the PCB for the cable management system into the power supply. All the jacks are just sticking out of a big punched hole.

The Decathlon provides enough cables and connectors for just about any situation. The length of up to 105cm will reach any component even in larger cases. The distance between each plug can be a little bit too long, however. If you have two hard drives above one another and you use only one cable then you will have to fit the extra 25cm of cable somewhere in between. Several shorter distances between connectors would be appreciated, allowing the end user to select the cable that's best for their particular setup and thus avoid making a cable salad - after all, that's the purpose of using modular cables in the first place.


The fan guard of the 12cm fan is embedded in the housing of the power supply which is good for cases that do not have enough space for the added bulge. The fan itself is different from the one in the Olympia OP650. This one is manufactured by Adda and rated at 0.50A. The differences between the two fans can clearly be seen in the fan speed and acoustic testing.



As we know from previous experience, Silverstone likes to attach all the cables to the PSU before shipping. The Decathlon DA650 is no different. The cable harnesses are sleeved up to the first connector. After the first connector, the cables are left blank without even cable ties. The jacks are located on the upper half of the front side of the PSU. Below the jacks is a little graphic that shows each jack with the appropriate connector name. With all the cables disconnected you can see how Silverstone installed the PCB for the cable management system into the power supply. All the jacks are just sticking out of a big punched hole.

The Decathlon provides enough cables and connectors for just about any situation. The length of up to 105cm will reach any component even in larger cases. The distance between each plug can be a little bit too long, however. If you have two hard drives above one another and you use only one cable then you will have to fit the extra 25cm of cable somewhere in between. Several shorter distances between connectors would be appreciated, allowing the end user to select the cable that's best for their particular setup and thus avoid making a cable salad - after all, that's the purpose of using modular cables in the first place.


The fan guard of the 12cm fan is embedded in the housing of the power supply which is good for cases that do not have enough space for the added bulge. The fan itself is different from the one in the Olympia OP650. This one is manufactured by Adda and rated at 0.50A. The differences between the two fans can clearly be seen in the fan speed and acoustic testing.
Originally published at https://www.anandtech.com/show/2296 (Wayback Machine).