AMD's Opteron hits 3.2GHz
- Posted in
- IT Computing
Tyan Transport TA26
It has taken us a while, but we finally have a full blown Socket F server in the labs.

The Tyan TA26's front
The 2U rack-mountable barebone TA26 B2932 supports two Socket F Opterons and didn't have any trouble with our Opteron 3.2GHz parts. (The BIOS was flashed to version 2.0). The exact model in the lab is the B2932T26W8HR which supports eight hot swappable SAS disks and a (1+1) redundant 600W power supply.

The internals of our Tyan Server
The motherboard in the system is the TYAN Thunder n3600M S2932, which is based on the NVIDIA nForce Pro 3600. A total of sixteen DDR2 DIMM sockets support up to 64GB of registered DDR2-667 memory. Two PCI Express x16 slots (x8 electrical) allow interested sysops to turn this server into an SLI gaming machine, but you'll need 2U GeForce cards.... (We are kidding, of course.) It is good to see that there are still two PCI-X 133/100MHz, one PCI-X 100MHz, and one 32-bit PCI slot available as this will protect any previous investments in NICs and storage adapters.
Our experiences were very good with this server: removable components such as fans, heatsinks, disks, and PSUs are very user-friendly and easy to use. We saw only one minor disadvantage: the three fast fans are capable of cooling the 3.2GHz chips, but when one fails the cooling system hits its limits. We didn't experience any crashes, but the CPUs got very hot (70-75°C) with two fans. On the plus side, the automatic fan speed control does a very good job in adjusting fan speed to provide sufficient heat dissipation. There is very little latency: the fan speed almost immediately increases as the CPU throttles up from being idle at 1GHz to full load at 3.2GHz.
It has taken us a while, but we finally have a full blown Socket F server in the labs.

The Tyan TA26's front
The 2U rack-mountable barebone TA26 B2932 supports two Socket F Opterons and didn't have any trouble with our Opteron 3.2GHz parts. (The BIOS was flashed to version 2.0). The exact model in the lab is the B2932T26W8HR which supports eight hot swappable SAS disks and a (1+1) redundant 600W power supply.

The internals of our Tyan Server
The motherboard in the system is the TYAN Thunder n3600M S2932, which is based on the NVIDIA nForce Pro 3600. A total of sixteen DDR2 DIMM sockets support up to 64GB of registered DDR2-667 memory. Two PCI Express x16 slots (x8 electrical) allow interested sysops to turn this server into an SLI gaming machine, but you'll need 2U GeForce cards.... (We are kidding, of course.) It is good to see that there are still two PCI-X 133/100MHz, one PCI-X 100MHz, and one 32-bit PCI slot available as this will protect any previous investments in NICs and storage adapters.
Our experiences were very good with this server: removable components such as fans, heatsinks, disks, and PSUs are very user-friendly and easy to use. We saw only one minor disadvantage: the three fast fans are capable of cooling the 3.2GHz chips, but when one fails the cooling system hits its limits. We didn't experience any crashes, but the CPUs got very hot (70-75°C) with two fans. On the plus side, the automatic fan speed control does a very good job in adjusting fan speed to provide sufficient heat dissipation. There is very little latency: the fan speed almost immediately increases as the CPU throttles up from being idle at 1GHz to full load at 3.2GHz.
Originally published at https://www.anandtech.com/show/2294 (Wayback Machine).