Gigabyte's New Odin GT 800W Power Supply
- Posted in
- Cases/Cooling/PSUs
3.3V DC Output
Starting with the 3.3V rails we encounter slight problems. At lower loads there's nothing to concern us, but as the load rises the 3.3V rail drops tremendously and barely manages to stay within specification. As we will describe later on we have measured the same low voltages with the P-Tuner software which confirms our readings, and we will see this pattern on all of the other rails. It's not only at higher temperatures that this power supply delivers lower voltages; we found even at room temperature where the internal components should stay cooler that we still get large voltage drops.
The heatsinks don't get too hot like as we will see later, but since we only measure the heatsinks we don't know the exact temperatures of the other components on the PCB. As we mentioned earlier, we think that the heatsinks may be too big to let any air through to the components on the board. The dropping voltages could be a result of this.




| 3.3V DC Output | |||
| Percentage | Amperage | Wattage | Wattage (All rails combined) |
| 10% | 1.92 | 6.36 | 77.95 |
| 20% | 3.85 | 12.67 | 158.11 |
| 30% | 5.77 | 18.87 | 236.48 |
| 40% | 7.7 | 25.03 | 314.35 |
| 50% | 9.62 | 31.07 | 391.55 |
| 60% | 11.55 | 37.08 | 467.94 |
| 70% | 13.47 | 42.97 | 544.95 |
| 80% | 15.4 | 48.82 | 620.44 |
| 90% | 17.32 | 54.39 | 695.26 |
| 100% | 19.25 | 60.06 | 769.57 |
Starting with the 3.3V rails we encounter slight problems. At lower loads there's nothing to concern us, but as the load rises the 3.3V rail drops tremendously and barely manages to stay within specification. As we will describe later on we have measured the same low voltages with the P-Tuner software which confirms our readings, and we will see this pattern on all of the other rails. It's not only at higher temperatures that this power supply delivers lower voltages; we found even at room temperature where the internal components should stay cooler that we still get large voltage drops.
The heatsinks don't get too hot like as we will see later, but since we only measure the heatsinks we don't know the exact temperatures of the other components on the PCB. As we mentioned earlier, we think that the heatsinks may be too big to let any air through to the components on the board. The dropping voltages could be a result of this.




Originally published at https://www.anandtech.com/show/2283 (Wayback Machine).