Archive 1997–2024

The Single 12V Rail SilverStone Olympia OP650

Temperatures

Temperatures inside of the power supply are a very important design aspect and difficult to handle by the manufacturers. The heatsinks need to have a decent size while still letting air through to cool down other components on the PCB. The primary heatsink does not get as hot as the secondary does. At the beginning of each test we connect two temperature diodes to the heatsinks to measure the increasing heat. We are then able to compare these results with the speed of the fan and the exhausted air. With hot heatsinks and cold exhausted air the power supply clearly has a problem with bad airflow or bad heatsink-design.

During the test the primary heatsink reached a temperature of just 60°C which was exactly the same temperature the exhausted air had. The secondary heatsink reached just about 90°C which is quite hot. With just 38 dB(A) and a fan speed of 2300 rpm this power supply had a fan as powerful as any other and should have cooled things a little better. This makes us question whether the heatsink design could have been better, or if a larger heatsink would have made more sense. Compared to each other the primary heatsink has around 30-40% bigger volume than the secondary. Soon we will test the 850W version of this series which will give us more insight into whether or not this is a general issue with Silverstone's heatsink design.







Originally published at https://www.anandtech.com/show/2275 (Wayback Machine).