Enzotech Ultra-X: If Looks Could Chill
- Posted in
- Cases/Cooling/PSUs
Scaling of Cooling Performance
The Ultra-X performance was average at stock idle and below average among top coolers at stock load. As overclocks are raised, the Enzotech exhibits improved performance in the ability to cool the CPU under stress conditions. To be as fair as possible all overclocking tests were run with the Enzotech fan at the highest speed.
At 2.93GHz the retail HSF is running at 41C, compared to 32C with the Ultra-X. This is a delta of 9C. The delta becomes greater as the overclock increases. At 3.73GHz the idle with the retail fan is 56C compared to the Ultra-X at 39C - a delta of 17C. The cooling performance of the Enzotech is much better than the Intel retail cooler at idle, but the Ultra-X does not reach the same cooling levels measured with the Thermalrights (with a Scythe S-Flex SFF21F fan) or the stock Tuniq 120. The top Thermalright Ultra-120 eXtreme, for example is at 33C at the same 3.73GHz.
We also need to compare cooling efficiency of the Enzotech Ultra-X under load conditions to the retail HSF and other recently tested CPU coolers. Load testing can be very revealing of a cooler's efficiency. A basically flat line, particularly form 3.73GHz upward, indicates the cooler is still in its best cooling range. A line that is increasing rapidly indicates a cooler nearing the end of its ability to cool efficiently. Lines which parallel the best coolers over a range of values are indicate that the coolers have similar cooling efficiency.
The Ultra-X is very efficient in cooling in the 2.93 GHz to 3.73 GHz overclock range. As you can see in the chart the cooling is almost a horizontal line in this range. The Enzotech continues on to a highest overclock of 3.86GHz, which is short of the 3.90GHz to 3.94GHz most of the top coolers in our testing have achieved. These results are similar to other down-facing coolers. While the overclock is the best we have seen with a down-facing cooler, they are still below the top heatpipe towers. The slope of the Ultra-X in this range from 3.73GHz to 3.86GH is steeper than the heatpipe towers, indicating it is nearing the end of its range of efficient cooling.
Unfortunately, the Ultra-X is not in the same cooling category as the best heatpipe towers we have tested. We hoped this cooler might be the down-facing cooler to buck the trend, but that is not the case. Ultra-X is a decent cooler to the range just below the best, but cooling efficiency is similar to other down-facing heatpipe towers tested.
As stated many times, the overclocking abilities of the CPU will vary at the top, depending on the CPU. This particular CPU does higher FSB speeds than any X6800 we have tested, but the 3.90GHz top speed with the Tuniq is pretty average among the X6800 processors we have tested with Tuniq cooling. A few of the other processors tested with the best air coolers reach just over 4 GHz, but the range has been 3.8 to 4.0GHz. Stock cooling generally tops out 200 to 400 MHz lower, depending on the CPU, on the processors tested in our lab.
The Ultra-X performance was average at stock idle and below average among top coolers at stock load. As overclocks are raised, the Enzotech exhibits improved performance in the ability to cool the CPU under stress conditions. To be as fair as possible all overclocking tests were run with the Enzotech fan at the highest speed.
![]() |
| Click to enlarge |
At 2.93GHz the retail HSF is running at 41C, compared to 32C with the Ultra-X. This is a delta of 9C. The delta becomes greater as the overclock increases. At 3.73GHz the idle with the retail fan is 56C compared to the Ultra-X at 39C - a delta of 17C. The cooling performance of the Enzotech is much better than the Intel retail cooler at idle, but the Ultra-X does not reach the same cooling levels measured with the Thermalrights (with a Scythe S-Flex SFF21F fan) or the stock Tuniq 120. The top Thermalright Ultra-120 eXtreme, for example is at 33C at the same 3.73GHz.
We also need to compare cooling efficiency of the Enzotech Ultra-X under load conditions to the retail HSF and other recently tested CPU coolers. Load testing can be very revealing of a cooler's efficiency. A basically flat line, particularly form 3.73GHz upward, indicates the cooler is still in its best cooling range. A line that is increasing rapidly indicates a cooler nearing the end of its ability to cool efficiently. Lines which parallel the best coolers over a range of values are indicate that the coolers have similar cooling efficiency.
![]() |
| Click to enlarge |
The Ultra-X is very efficient in cooling in the 2.93 GHz to 3.73 GHz overclock range. As you can see in the chart the cooling is almost a horizontal line in this range. The Enzotech continues on to a highest overclock of 3.86GHz, which is short of the 3.90GHz to 3.94GHz most of the top coolers in our testing have achieved. These results are similar to other down-facing coolers. While the overclock is the best we have seen with a down-facing cooler, they are still below the top heatpipe towers. The slope of the Ultra-X in this range from 3.73GHz to 3.86GH is steeper than the heatpipe towers, indicating it is nearing the end of its range of efficient cooling.
Unfortunately, the Ultra-X is not in the same cooling category as the best heatpipe towers we have tested. We hoped this cooler might be the down-facing cooler to buck the trend, but that is not the case. Ultra-X is a decent cooler to the range just below the best, but cooling efficiency is similar to other down-facing heatpipe towers tested.
As stated many times, the overclocking abilities of the CPU will vary at the top, depending on the CPU. This particular CPU does higher FSB speeds than any X6800 we have tested, but the 3.90GHz top speed with the Tuniq is pretty average among the X6800 processors we have tested with Tuniq cooling. A few of the other processors tested with the best air coolers reach just over 4 GHz, but the range has been 3.8 to 4.0GHz. Stock cooling generally tops out 200 to 400 MHz lower, depending on the CPU, on the processors tested in our lab.
Originally published at https://www.anandtech.com/show/2260 (Wayback Machine).

