Scythe Ninja Plus Rev. B: Updated Cooling Legend
- Posted in
- Cases/Cooling/PSUs
Cooling at Stock Speed
Some users will never overclock their CPU, but they still want to run the coolest CPU temperatures possible to enhance stability and extend CPU life. The Scythe Ninja Plus B kit includes a moderate output low noise 120mm fan. We also tested the Vindicator with the 120mm SilenX IXTREMA 120 fan.

With the stock fan the end user does get relative silence, but the cost is poorer cooling than most other heatpipe towers tested at AnandTech. As soon as the switch is made to the SilenX fan you can see this cooler is starved for airflow with the stock fan. Idle temps with the SilenX drop to 27C, which is among the best measured performance at stock Idle in our cooler reviews
It is more difficult to effectively simulate a computer being stressed by all of the conditions it might be exposed to in different operating environments. For most home users CPU power is most taxed with contemporary gaming. Therefore our stress test simulates running a demanding contemporary game.
The Far Cry River demo is looped for 30 minutes and the CPU temperature is captured at 4 second intervals with the NVIDIA monitor "logging" option. The highest temperature during the stress test is then reported. Momentary spikes are ignored, as we report a sustained high-level temp that you would expect to find in this recording configuration.
Cooling efficiency of the Scythe Ninja Plus B was tested under load conditions with both the stock fan and the SilenX at stock speed. Results are compared to the Intel retail HSF and other recently tested CPU coolers.

The Ninja Plus B under load at stock speeds reached a maximum temperature of 47C with the stock cooler. This was among the worst load results at stock speed with the coolers tested at AnandTech. Switching to the SilenX fan improved the load temperature to 35C. This is a stellar result, and one of the best stock speed load temperatures we have tested. This compared to the Tuniq at 34C, the Cooler Master Hyper 6+ and Zalman 9700 at 36C, the Thermalright Ultra 120 at 33C , and the top Ultra 120 Extreme at 32C.
It should also be clear that cooling results with the Scythe Ninja Plus B are quite different than results with the OCZ Vindicator using the same SilenX fan. The Ninja Plus B cools better than the Vindicator using the same fan. This strongly suggests that while the Vindicator looks similar it is not just a rebadged Scythe Ninja Rev. B. There are enough differences in their designs to have an impact on cooling performance. This becomes clearer in a closer look at cooler performance scaling.
Some users will never overclock their CPU, but they still want to run the coolest CPU temperatures possible to enhance stability and extend CPU life. The Scythe Ninja Plus B kit includes a moderate output low noise 120mm fan. We also tested the Vindicator with the 120mm SilenX IXTREMA 120 fan.

With the stock fan the end user does get relative silence, but the cost is poorer cooling than most other heatpipe towers tested at AnandTech. As soon as the switch is made to the SilenX fan you can see this cooler is starved for airflow with the stock fan. Idle temps with the SilenX drop to 27C, which is among the best measured performance at stock Idle in our cooler reviews
It is more difficult to effectively simulate a computer being stressed by all of the conditions it might be exposed to in different operating environments. For most home users CPU power is most taxed with contemporary gaming. Therefore our stress test simulates running a demanding contemporary game.
The Far Cry River demo is looped for 30 minutes and the CPU temperature is captured at 4 second intervals with the NVIDIA monitor "logging" option. The highest temperature during the stress test is then reported. Momentary spikes are ignored, as we report a sustained high-level temp that you would expect to find in this recording configuration.
Cooling efficiency of the Scythe Ninja Plus B was tested under load conditions with both the stock fan and the SilenX at stock speed. Results are compared to the Intel retail HSF and other recently tested CPU coolers.

The Ninja Plus B under load at stock speeds reached a maximum temperature of 47C with the stock cooler. This was among the worst load results at stock speed with the coolers tested at AnandTech. Switching to the SilenX fan improved the load temperature to 35C. This is a stellar result, and one of the best stock speed load temperatures we have tested. This compared to the Tuniq at 34C, the Cooler Master Hyper 6+ and Zalman 9700 at 36C, the Thermalright Ultra 120 at 33C , and the top Ultra 120 Extreme at 32C.
It should also be clear that cooling results with the Scythe Ninja Plus B are quite different than results with the OCZ Vindicator using the same SilenX fan. The Ninja Plus B cools better than the Vindicator using the same fan. This strongly suggests that while the Vindicator looks similar it is not just a rebadged Scythe Ninja Rev. B. There are enough differences in their designs to have an impact on cooling performance. This becomes clearer in a closer look at cooler performance scaling.
Originally published at https://www.anandtech.com/show/2208 (Wayback Machine).