HP LP3065: A new contender for the 30" throne
- Posted in
- Displays
Viewing Angles
Viewing angles are one of those specifications that have become very inflated by the manufacturers. The basic requirement is that the display has to maintain a 10:1 contrast ratio in order to qualify as "viewable". The reality is that most LCDs are unfit for viewing outside of about a 45° arc. The good news is we really doubt that most people would want to view a display from anything more then a 45° angle. We used our camera to take shots from head-on as well as from the left and right sides at ~30° angles, showing how brightness and contrast ratios are affected in off-angle viewing. We also took pictures from above and below at ~30° angles. Links to the viewing angle images of previously reviewed LCDs are available for comparison below:
Acer AL2216W
Dell 2405FPW
Dell 2407WFP
Dell 3007WFP
Gateway FPD2485W
The HP LP3065 comes in first place when it comes to viewing angles. Within a 60° viewing arc, the colors remain very true. This is one instance where the updated panel on the HP LP3065 clearly ranks ahead of the Dell 3007WFP. Meanwhile, the TN panel on the Acer AL2216W offers an extremely limited viewing arc, especially in the vertical plane. We wouldn't be too concerned about viewing angles personally, as outside of the Acer display all of the LCDs are generally acceptable for use within a 60° viewing arc, both horizontally and vertically. Even the Acer panel is usable provided your eyes are in roughly the same vertical plane, as it suffers mostly in the vertical viewing angle.
Anyone who is seriously concerned about accurate colors is going to want to view pretty much any display from a direct front angle, and that tends to be the most comfortable position as well. That's one of the reasons we don't really worry too much about viewing angles. However, some people might work in environments where off-angle viewing is more important, so it's not entirely meaningless. Unfortunately, the manufacturer viewing angles tend to be exaggerated to the point of being useless, as the standard 10:1 contrast ratio is not acceptable for actual use. 100:1 is good enough, and maybe even a bit lower, but a 10:1 ratio is not at all practical.
Viewing angles are one of those specifications that have become very inflated by the manufacturers. The basic requirement is that the display has to maintain a 10:1 contrast ratio in order to qualify as "viewable". The reality is that most LCDs are unfit for viewing outside of about a 45° arc. The good news is we really doubt that most people would want to view a display from anything more then a 45° angle. We used our camera to take shots from head-on as well as from the left and right sides at ~30° angles, showing how brightness and contrast ratios are affected in off-angle viewing. We also took pictures from above and below at ~30° angles. Links to the viewing angle images of previously reviewed LCDs are available for comparison below:
Acer AL2216W
Dell 2405FPW
Dell 2407WFP
Dell 3007WFP
Gateway FPD2485W
![]() |
| HP LP3065 |
The HP LP3065 comes in first place when it comes to viewing angles. Within a 60° viewing arc, the colors remain very true. This is one instance where the updated panel on the HP LP3065 clearly ranks ahead of the Dell 3007WFP. Meanwhile, the TN panel on the Acer AL2216W offers an extremely limited viewing arc, especially in the vertical plane. We wouldn't be too concerned about viewing angles personally, as outside of the Acer display all of the LCDs are generally acceptable for use within a 60° viewing arc, both horizontally and vertically. Even the Acer panel is usable provided your eyes are in roughly the same vertical plane, as it suffers mostly in the vertical viewing angle.
Anyone who is seriously concerned about accurate colors is going to want to view pretty much any display from a direct front angle, and that tends to be the most comfortable position as well. That's one of the reasons we don't really worry too much about viewing angles. However, some people might work in environments where off-angle viewing is more important, so it's not entirely meaningless. Unfortunately, the manufacturer viewing angles tend to be exaggerated to the point of being useless, as the standard 10:1 contrast ratio is not acceptable for actual use. 100:1 is good enough, and maybe even a bit lower, but a 10:1 ratio is not at all practical.
Originally published at https://www.anandtech.com/show/2194 (Wayback Machine).
