Intel G965: microATX Performance Update
- Posted in
- CPUs
Test Setup
Our two boards are from Gigabyte and each one offers similar features, BIOS options, and board level components. The street price for each board is around $105 at this time. We would like to mention that Foxconn and ASUS have matching sibling pairs but our Gigabyte GA-965GM-S2 was already in testing so it was chosen in the interest of saving time. Our Foxconn G9657MA-8KS2H offers a wider selection of BIOS options including the ability to change several voltage options, so it may perform slightly better overall but not enough to dramatically alter our findings. We set up each board with the exact same BIOS settings and found that the Gigabyte GA-965P-S3 ran slightly tighter memory sub-timings. We thought about using MemSet to adjust the sub-timings but figured in the end that most users would not utilize this utility to change timings on boards in the price sector.
A 2GB memory configuration is standard in our entry level Vista test beds as we highly recommend this amount of memory now. Our choice of mid-range OCZ Flex XLC PC-6400 memory represents an excellent balance of price and performance and offers a very wide range of memory settings at stock voltages. Our memory timings are determined by finding the best memory bandwidth via MemTest 86 along with test application results for each board. We only optimize the four main memory settings (CAS, tRCD, tRP, and tRAS) with sub-timings remaining at Auto settings. This will benefit the P965 platform slightly as we found the memory sub-timings were generally tighter on this board than on the G965 variant.
We are utilizing an MSI X1950 XTX video card to prevent our 1280x1024 resolutions from becoming completely GPU bound for our motherboard test results. All of our tests are run in an enclosed case with a dual optical/hard drive setup to reflect a moderately loaded system platform. Windows Vista is fully updated and we load a clean drive image for each system to ensure driver conflicts are kept to a minimum.
We are not going to address overclocking capabilities of the two boards in today's test results. However, the G965 is limited to 350FSB due to the X3000 graphics core and shared memory pipeline. The realistic overclock levels we have seen on our best G965 samples have been around 325FSB. Based upon this, if overclocking is a priority then we definitely recommend the P965 based boards in this price sector.
Synthetic Memory Performance
In our Sandra memory test, we see the P965 based board scoring slightly higher in both the buffered and unbuffered scores due to tighter sub-timing settings for the memory. We will see this slight performance improvement in the unbuffered scores generally give the P965 board an advantage in the memory sensitive benchmarks. When we equalize the settings, the P965 still scored about 40 points better on each result - less than a 1% advantage.
We know Intel made a few concessions with the memory controller due to the on-board X3000 graphics core but this primarily affects overclocking capabilities. With additional BIOS tuning from Gigabyte in the memory and MCH timing settings we are sure the end results could be even. The results with SuperPi 1.5 also reflect a slight but unnoticeable difference between the two boards.
| Gigabyte GA-965P-S3 / GA-965GM-S2 Testbed | |
| Processor: | Intel Core 2 Duo E6300 Dual Core, 1.86GHz, 2MB Unified Cache 1066FSB, 7x Multiplier |
| CPU Voltage: | 1.3250V |
| Cooling: | Zalman 9500 Air Cooling |
| Power Supply: | Corsair CMPSU-620HX 620W |
| Memory: | OCZ Flex XLC PC2-6400 (2x1GB) (ProMOS Memory Chips) |
| Memory Settings: | 3-4-4-9 1.90V |
| Video Cards: | MSI X1950XT |
| Video Drivers: | ATI Catalyst 7.2 |
| Hard Drive: | Western Digital 74GB 10,000RPM SATA 16MB Buffer Seagate Barracuda 7200.10 500GB SATA 16MB Buffer |
| Optical Drives: | Plextor PX-760A, PX-B900A |
| Case: | Cooler Master CM Stacker 830 |
| Operating System: | Windows Vista Home Premium 32-bit |
| . | |
Our two boards are from Gigabyte and each one offers similar features, BIOS options, and board level components. The street price for each board is around $105 at this time. We would like to mention that Foxconn and ASUS have matching sibling pairs but our Gigabyte GA-965GM-S2 was already in testing so it was chosen in the interest of saving time. Our Foxconn G9657MA-8KS2H offers a wider selection of BIOS options including the ability to change several voltage options, so it may perform slightly better overall but not enough to dramatically alter our findings. We set up each board with the exact same BIOS settings and found that the Gigabyte GA-965P-S3 ran slightly tighter memory sub-timings. We thought about using MemSet to adjust the sub-timings but figured in the end that most users would not utilize this utility to change timings on boards in the price sector.
A 2GB memory configuration is standard in our entry level Vista test beds as we highly recommend this amount of memory now. Our choice of mid-range OCZ Flex XLC PC-6400 memory represents an excellent balance of price and performance and offers a very wide range of memory settings at stock voltages. Our memory timings are determined by finding the best memory bandwidth via MemTest 86 along with test application results for each board. We only optimize the four main memory settings (CAS, tRCD, tRP, and tRAS) with sub-timings remaining at Auto settings. This will benefit the P965 platform slightly as we found the memory sub-timings were generally tighter on this board than on the G965 variant.
We are utilizing an MSI X1950 XTX video card to prevent our 1280x1024 resolutions from becoming completely GPU bound for our motherboard test results. All of our tests are run in an enclosed case with a dual optical/hard drive setup to reflect a moderately loaded system platform. Windows Vista is fully updated and we load a clean drive image for each system to ensure driver conflicts are kept to a minimum.
We are not going to address overclocking capabilities of the two boards in today's test results. However, the G965 is limited to 350FSB due to the X3000 graphics core and shared memory pipeline. The realistic overclock levels we have seen on our best G965 samples have been around 325FSB. Based upon this, if overclocking is a priority then we definitely recommend the P965 based boards in this price sector.
Synthetic Memory Performance
![]() |
| Click to enlarge |
In our Sandra memory test, we see the P965 based board scoring slightly higher in both the buffered and unbuffered scores due to tighter sub-timing settings for the memory. We will see this slight performance improvement in the unbuffered scores generally give the P965 board an advantage in the memory sensitive benchmarks. When we equalize the settings, the P965 still scored about 40 points better on each result - less than a 1% advantage.
We know Intel made a few concessions with the memory controller due to the on-board X3000 graphics core but this primarily affects overclocking capabilities. With additional BIOS tuning from Gigabyte in the memory and MCH timing settings we are sure the end results could be even. The results with SuperPi 1.5 also reflect a slight but unnoticeable difference between the two boards.
Originally published at https://www.anandtech.com/show/2192 (Wayback Machine).
