Archive 1997–2024

Value DDR2-800 from Super Talent: Where Can You Go?

Stock Memory Performance

Most Intel Socket T (Socket 775) motherboards provide a wide range of memory ratios that match available DDR2 memory. End-users can select the memory ratio that matches their DDR2 memory speed. Our memory testing begins with the same approach. We first test all of the stock ratios at the fastest stable timings we can achieve at the given ratio. With these ratios, CPU speed remains the same at 2.93GHz in our memory test bed, and memory speed is varied by selecting different ratios.

DDR2 memory is then pushed from the highest stock ratio that could be achieved in testing - in this case 889 (3:5) - to the highest FSB speed at the stock multiplier. We could not reach DDR2-1067 with this value Super Talent DDR2-800, so we settled for the intermediate ratio of 889. The system was then pushed to DDR-1000, which was the highest stable speed reached that ran our complete test suite. We were able to boot at speeds much higher than 1000, and we could actually navigate the boot screen up to DDR2-1050, but the system was not stable in Windows and could not complete our test suite, even at the highest 2.4V supported by the ASUS board. Other systems may achieve higher test results with more voltage.


Click to enlarge.

There are some potential downsides to this approach to memory testing. With the memory controller in the chipset, instead of part of the processor as in AM2 systems, there is a small performance penalty for speeds other than a 1:1 ratio (DDR2-533 in this case). The actual performance penalty is in reality very small and it has minimal impact on test results. As a result memory scales nicely through the various speed options.

At DDR2-800 the memory completed our benchmarks at 4-4-4-11 timings at just 1.95V. This is significantly faster than the rated 5-5-4-12 timings. Most boards can easily supply 1.95V, but if your board has a fixed memory voltage you may need to use slower timings for complete stability with this memory. DDR2-667 similarly required 2.10V to achieve 3-3-3-9 timings. If you can't supply 2.1V you will likely need 4-4-3-9 or slower timings at stock 1.8V.

Many buyers of value DDR2-800 memory will not have a motherboard that can supply voltages like the highest 2.30V required in our testing at DDR2-1000. If your top available voltage is less than 2.3V you will not be able to achieve DDR2-1000 performance with this memory. Top results at stock voltage will likely be in the DDR2-900 range at the rated 5-5-4-12 timings

The performance results found in our testing give most every buyer some choices when using this value Super Talent DDR2-800 in their system. If their board is voltage limited, the memory is still usable at slightly slower timings. If the board supplies a very wide voltage range, then you can likely squeeze better timings from this memory with higher voltage. With air cooling, however, the best you can expect to achieve is around DDR2-1000.

Originally published at https://www.anandtech.com/show/2124 (Wayback Machine).